Drilling Machine

Drilling Machines are of following types:

  •       CNC Two Spindles Joint Plate Drilling Machine
  •       CNC Single Spindle Joint Plate Drilling Machine
  •       CNC Gantry type Drilling Machine

Features

  • With interactive command and color display, easy learn and easy operation

  • With linear, matrix and flange drill pattern. It would not need the G, M code program

  • With simulation function, it also can indicate which hole will be drilling by move coarser

  • It is possible to read the DXF file and display the hole pattern as well as outward of plate on screen.

  • DAMA’S drill machine is a strong gantry structure, it needs space save 1/2.

  • DAMA’S drill machine is a compact design. The gantry machine, CNC controller, hydraulic power system those were integrated.

  • The distance of two spindle that can be adjusted by hand-wheel and two spindle also can be active individually or simultaneously to reach the flexible goal.

  • With keep tight equipment to insure machine stable while machine is drilling.

  • The alignment and hydraulic fixture of plate which are two in one designed, the plate load, unload, clamp quickly and convenience.

  • The machine with four work area on the table, while one side of table is working another side of table allow user to load or unload plate. Thus, the machine there is no idle time and twice the amount of drilling.

  • With avoid spraying designed to save cooling water and keep the environment clean.

  • The spindle unit with automatic initial high for drilling

  • The spindle unit is provided with a sensitive self-controlled speed change function for rapid reach toplate then change to preset speed for drills.

  • The user does not need consider the tool length and set automatic broken chip during drilling to enhance efficiency.

  • The spindle rpm control by inverter and the number of rpm is displayed on LCD. The user change   rpm by knob adjusted.

  • Program hold can be active in any time while the tool dull, after replace tool, easy return and restart.

  • With center drilling function, providing user easy check the hope pitch of plate.

  • The machine is provided with Auto-Off function. This function suit a large plate and there is a lot of hole to be drilled on night work.

A very useful machine for your Structural plate drilling jobs. The machine is much faster and precise when compared to the traditional way of Drilling.  The machine is available with Single Spindle or Double Spindle models. Various models are available with effective work area varying from 600 mm x 2000 mm to 1600 x 4000 mm. The work areas are divided into 4 work areas, so when the machine is drilling on one side, the operator can load plates on the other side. The max thickness the machine can take is up to 100 mm and plates can be placed one above the other and clamped hydraulically.

For bigger size plates drilling, we can also offer Gantry type CNC Drilling machines .